HrvatskihrEnglishen
Web login
img not found
img not found
img not found

Ivica Garašić

prof. dr. sc. Ivica Garašić

full professor
 
Teaching

undergraduate studijski program

Production Technologies (282243) - Lecturer in charge, Laboratory exercises

CroRIS

Published papers recorded in the Croatian Scientific Bibliography Database (CROSBI)

Comparison of the properties of shop-primer coating after laser beam and mag welding process of non-alloy structural steel

Fatović, Ivan; Stojanović, Ivan; Garašić, Ivica
2026.

Comparison of primer coating properties in relation to the welding process of low alloy steel

Marčec, Dorotea; Garašić, Ivica; Stojanović, Ivan
2026.

Knezović, Nikola; Topić, Angela; Garašić, Ivica
2026.
International journal of innovative solutions in engineering

Garašić, Ivica
2026.

Utjecaj parametara automatiziranog višeprolaznog MAG zavarivanja na lomnu žilavost i osjetljivost na vodikovu krhkost čelika za cjevovode API 5L X70

Ćorić, Danko; Jurgec, Kristijan; Garašić, Ivica; Remenar, Maja
2026.
Processes

Influence of Ar-N2 shielding gas mixture on joint geometry and microstructure in TIG pulse welding of austenitic Cr-Ni steels

Pravdić, Ivan
2025.

Comparative analysis of the MAG welding process efficiency with solid and metal flux-cored wires using ternary Ar-CO2-02 shielding gas mixtures

Šebešćen, Marin
2025.

Requirements for welding in the production of pressure equipment

Hlebić, Stjepan
2025.

Analysis of requirements in standard HRN EN 13134 for the qualification of brazing process

Loborec, Mihael
2025.

Comparison of welding technology of Y-25 longitudinal beams

Burušić, Lovro
2025.

Comparative study of MAG and MCAW welding of S355J2+N structural steel

Garašić, Ivica; Remenar, Maja; Šebešćen, Marin; Jurgec, Kristijan
2025.

Application of 6063 alloy filler material in robotic double pulse MIG welding

Martinjaš, Antonio
2025.

Landek, Darko; Garašić, Ivica; Skejić, Davor; Valčić, Anđelo; Čudina, Ivan; Štefok, Mislav
2025.
Metals

Analysis of technology and equipment for automatic welding of gas pipelines

Lučev, Petra
2025.

Comparison of the robotic WiseThin MAG and conventional MAG welding process

Frajzman, Marko; Garašić, Ivica; Kožuh, Zoran; Šutalo, Marin; Eržišnik, Jadranka
2025.

Garašić, Ivica
2025.

Skejić, Davor; Valčić, Anđelo; Čudina, Ivan; Garašić, Ivica; Dokšanović, Tihomir
2025.
Buildings

Frajzman, Marko; Garašić, Ivica; Kožuh, Zoran; Ščuric, Dario; Eržišnik, Jadranka;
2025.

Gojić, Mirko; Kožuh, Stjepan; Ivanić, Ivana; Dumenčić, Daniela; Garašić, Ivica; Kosec, Borut; Nagode, Aleš
2025.

Influence of welding on the strength reduction in the heat affected zone of aluminium alloy 6082

Duvnjak, Karlo
2025.

Overview of shielding gases for MIG/MAG welding

Gregurin, Patrik
2025.

Influence of filler material on mechanical properties of weld joint in SMAW of API 5L X70 pipelines

Milinković, Antonija
2025.

Optimization of mechanised metal flux cored wire welding

Lenđel, Monika
2025.

Utjecaj balansa polariteta AC MIG postupka na geometrijske značajke i BTF omjer pri aditivnoj proizvodnji električnim lukom i žicom aluminijske legure 6063

Štefok, Mislav; Garašić, Ivica; Remenar, Maja; Stojanović, Ivan; Majetić, Filip
2025.

Influence of parameters on joint geometry in laser welding of titanium

Drežnjak, Ivan
2025.

Analysis of residual stresses in aluminium alloy T-joints made by AC MIG and DC MIG process

Konjević, Ivan
2025.

Garašić, Ivica; Štefok, Mislav; Jurica, Maja; Skejić, Davor; Perić, Mato
2025.
Applied sciences (Basel)

Optimization of parameters during manual laser welding of aluminium alloys

Ščuric, Dario
2024.

Welding of steel pipelines for hydrogen transport

Fusić, Jan
2024.

Optimization of welding technology for steels S355J2+N and X5CrNi18-10 by MAG process

Premužić, Krsto
2024.

Analysis of the influence of shielding gas type on weld properties in MAG-P welding of duplex steel

Frajzman, Marko; Garašić, Ivica; Kapuđija, Petra
2024.

Analysis of the microstructure in the weld joint on hydrogen pipeline made of API 5L X70

Huđ, Ivan
2024.

Značajke mikrostrukture zida od aluminijske legure 6063 načinjenog aditivnom proizvodnjom električnim lukom i žicom

Vukić, Ivan
2024.

Influence of Ar-He mixture on joint shape at AC MIG welding of aluminium

Mišak, Lovro
2024.

Analysis of strength properties of 6063 aluminium alloy wall made by wire arc additive manufacturing

Čuček, Matej
2024.

Analysis of residual stress during welding of S355J2+N steel with MCAW process using C6X1 and C12X2 shielding gases

Novina, Tomislav
2024.

Influence of AC MIG process parameters on residual stress in wire and arc additive manufacturing

Belošević, Karlo
2024.

Kik, Tomasz; Garašić, Ivica; Perić, Mato; Landek, Darko; Jurica, Maja; Tonković, Zdenko
2024.
Energy (Oxford)

Influence of helium in gas shielding on weld shape in AC MIG welding of aluminium alloys

Toma, Dominik
2024.

Application of HRN EN 15085 standard requirements in manufacturing of transformer casing structure

Stunja, Patrik
2024.

Testing of weld joints according to standard HRN EN ISO 14555

Jukić, Josip
2024.

Infuence of the heat input during MIG welding of series 5083 and 6082 aluminium alloys on weld joint microstructure

Sikora, Mia
2024.

Influence of the filler material on crack appearance during MAG welding of structural and high alloyed austenitic steel

Belačić, Bruno
2024.

Comparison of AC MIG and MIG-P processes in welding of 5083 and 6082 aluminium alloys

Kuzek, Martina
2024.

Fuštar, Boris; Lukačević, Ivan; Skejić, Davor; Garašić, Ivica
2024.
Results in engineering

Construction of the device for testing of ballistic shield on antiterrorist vehicle

Grošinić, Monika
2023.

Optimization of TIG welding on AlMg pipes

Lovrić, Šime
2023.

PA ULTRASONIC TESTING OF AT WELD JOINTS IN RAILS

Kezele, Tomislav; Garašić, Ivica; Dragojević, Aleksandar
2023.

Influence of laser welding parameters on mechanical properties and microstructure in Hilumin / aluminium series 1050 joint

Klasić, Patrik
2023.

Landek, Darko; Garašić, Ivica; Štefok, Mislav; Jačan, Jurica
2023.

Influence of pulse parameters on geometry characteristics of TIG welded AISI 304 steel

Jurica, Maja; Garašić, Ivica; Liber, Mario
2023.

Garašić, Ivica; Perić, Mato; Tonković, Zdenko; Jurica, Maja; Štefok, Mislav; Kik, Tomasz
2023.

Analysis of shielding gas influence on penetration profile at MIG welding of aluminum

Majetić, Filip
2023.

Landek, Darko; Garašić, Ivica; Štefok, Mislav
2023.

Influence of welding parameters on defects at alternating current MIG welding of aluminium

Sikora, Mia
2023.

Garašić, Ivica ; Perić, Mato ; Tonković, Zdenko ; Jurica, Maja ; Štefok, Mislav ; Kik, Tomasz
2023.

Influence of current type and metal transfer on heat affect zone during MIG welding of aluminium alloy

Krsnik, Marko
2023.

Optimization of welding technology on aluminium alloy 6082-T6 with AC MIG process

Kučiš, Sandi
2023.

Application and parametrization of through arc sensor at robotized MAG welding

Pavlović, Marko
2023.

Analysis of residual stress during MCAW welding process in shielding of Ar-CO2-O2 mixture

Borevković, Borna
2023.

Perić, Mato ; Garašić, Ivica ; Štefok, Mislav ; Jurica, Maja ; Osman, Krešimir ; Čikić, Ante ; Busija, Zoran
2023.

EKSPERIMENTALNO ODREĐIVANJE ZAOSTALIH NAPREZANJA SUČELJENOG SPOJA AL-MG LEGURA DOBIVENOG MIG Zavarivanjem

Štefok, Mislav; Garašić, Ivica; Jurica, Maja; Jurlina, Vedran
2023.

The influence of the Ar-He shielding gas mixture on the mechanical properties of the welded joint of P91 steel

Jurgec, Kristijan; Garašić, Ivica; Jurica, Maja; Eržišnik, Jadranka
2023.

Analysis of oxygen content in root protection on the corrosion resistance of the stainless steel welded joint

Frajzman Marko; Garašić Ivica; Jurica Maja; Eržišnik Jadranka
2023.

Comparison of conventional pulse and AC MIG welding of aluminium alloy 5083 with application of Ar-He mixture

Nemec, Kristijan
2023.

Influence of root gas forming on corrosion properties of the weld

Oljača, Nina
2023.

Perić, Mato; Garašić, Ivica; Štefok, Mislav; Osman, Krešimir; Čikić, Ante; Tonković, Zdenko
2023.
Metals

Optimization of butt weld geometry for metal cored wire arc welding

Novina, Tomislav
2023.

Robotized welding with metal cored wire and application of Ar-CO2-O2 gas mixtures

Belačić, Bruno
2023.

Analysis of shielding gas influence on the weld properties at MAG welding of duplex steel

Kapuđija, Petra
2023.

Comparison of MIG-P and AC MIG welding process on properties of aluminium alloy 6082-T6 welded joint

Horvat, Karlo
2023.

Interpretation HRN EN ISO standard requirements for quality assessment of welds made by FSW process

Krpeta, Lovre
2022.

Influence of the parameters on weld profile at AC MIG welding of aluminium

Toma, Dominik
2022.

Optimization of pipeline welding technology by means of automatic processes

Filip Frigan
2022.

Analysis of weld microstructure at S690QL1 steel made by MMAW process

Mirjam Mijatović
2022.

Application of active cooling technique during wire and arc additive manufacturing

Grdić, Adriana
2022.

INFLUENCE OF POLARITY BALANCE DURING AC MIG CLADDING ON GEOMETRIC CHARACTERISTICS OF DUPLEX STEEL LAYER

Štefok, Mislav ; Kožuh, Zoran: Garašić, Ivica ; Jurica, Maja ; Eržišnik, Jadranka
2022.

Influence of Chemical Composition on the Quality of MIG welded As-Cast Aluminium alloy Joint

Bauer, Branko ; Jurica, Maja ; Dolinar, Alen ; Garašić, Ivica
2022.
Zavarivanje

INFLUENCE OF AC TIG WELDING PARAMETERS ON WELD JOINT PROPERTIES OF P91 STEEL

Mioč, Josip ; Garašić, Ivica ; Jurica, Maja
2022.

Klobučar, Damjan ; Pušavec, Franci ; Bračun, Drago ; Garašić, Ivica ; Kožuh, Zoran ; Vencl, Aleksandar ; Trdan, Uroš
2022.
Materials

Perić, Mato ; Garašić, Ivica ; Gubeljak, Nenad ; Tonković, Zdenko ; Nižetić, Sandro ; Osman, Krešimir
2022.
Metals

Vukovojac, Marin; Jalušić, Boris; Lesičar, Tomislav; Skozrit, Ivica; Garašić, Ivica; Tonković, Zdenko
2022.

Modular approach toward procedure development of central beam weldment assembly on electric railcar

Perkov, Gabrijela
2022.

Microstructural characteristics of Cr-Ni welds welded with AC MIG process

Bauer, Bruno
2022.

Optimalization of parameters at MIG welding of butt welds on Al-Mg alloys

Jurlina, Vedran
2022.

Development and application of the AC MIG welding process

Patrik Stunja
2022.

Optimalization of cladding technology with duplex wire by application of AC MIG process

Topić, Ivan
2022.

Influence of AC TIG welding parameters on P91 steel weld properties

Luka Grgurić
2022.

Analysis of residual stress in MIG and TIG welding of high alloyed Cr-Ni steels

Semenjuk, Filip
2022.

Analysis of oxygen influence in root protection on properties of weld joint

Frajzman, Marko
2022.

Application od 3D scanning in production of steel constructions according requirements of HRN EN 1090 standard

Žulj, Filip
2022.

Optimization of MAG welding technology on Toolox 33 steel

Grgurev Rumbak, Matej
2022.

Analysis of welding technology on Thor electric bicycle frame

Daničić, Filip
2022.

Analysis of application of AC MIG process in welding of thin AlMg3 alloy sheets

Šeper, Nikolina
2022.

Analysis of shielding gas influence in AC MIG duplex steel overlay welding

Ćuže, Mislav
2022.

Application of austenitic electrodes for underwater manual metal arc welding

Zovko, Ivan
2021.

Analysis of welding technology for austenitic steel X2CrNiMo17-12-2

Dario Gorupić
2021.

Optimisation of robotized MAG welding technology on boiler structure

Luka Car
2021.

Overview of processes and equipment for polyethylene pipe welding

Nika Jagodić
2021.

Application of resistance spot welding in automotive industry

Josip Pavković
2021.

Double pulse MIG welding of aluminium alloys

Fran Valenta
2021.

Optimization of wire and arc additive manufacturing for fabrication of wall in horizontal-vertical position

Vedran Jurlina
2021.

Optimization of wire and arc additive manufacturing for fabrication of inclined wall

Adriana Grdić
2021.

Determination of critical heat input for application of back shielding at TIG welding of Cr-Ni steel

Bruno Bauer
2021.

Optimization of wire and arc additive manufacturing for fabrication of wall in overhead position

Filip Semenjuk
2021.

Influence of heat treatment at wire and arc additive manufacturing on mechanical properties of duplex steel

Crneković, Karlo
2021.

Testing of welding properties on shop primers according HRN EN ISO 17652-2

Ražov, Iva
2021.

An overview of standards and test methods for determination of residual stresses in welded structures

Garašić Ivica, Kožuh Zoran, Zaninović Andrea, Jurica Maja
2021.

Optimization of active cooling parameters during wire and arc additive manufacturing

Vresk, Jurica
2021.

Influence of wire and arc additive manufacturing on microstructure of duplex steel

Ljušanin, Stipe
2021.

Analysis of X - ray and neutron diffraction test methods for residual stress measurement

Nemec, Kristijan
2021.

Influence of SAW parameters on properties of heat affected zone on S690 steel

Despetović, Hrvoje
2021.

Magnetism in welding 2nd part

Garašić, Ivica ; Jurica, Maja ; Vrbanc, Martin
2021.
Zavarivanje

Skejić, Davor ; ĆurkoviĆ, Ivan ; Garašić, Ivica ; Čudina, Ivan ; Dokšanović, Tihomir
2021.
ce/papers

Application of three component gas mixtures at metal cored arc welding

Brković, Nikola
2021.

Skejić, Davor ; Čudina, Ivan ; Garašić, Ivica ; Mazzolani, Federico
2021.
Applied sciences (Basel)

Application of aluminium alloys in shipbuilding

Dubovečak, Luka
2021.

APPLICATION OF CMT PROCESS FOR WIRE AND ARC ADDITIVE MANUFACTURING

Štefok, Mislav ; Jurić, Ivan ; Garašić, Ivica ; Eržišnik, Jadranka
2021.

Influence of the energy input on microstructure of the duplex steel during wire and arc additive manufacturing

Matija Kušević
2021.

Double pulse MIG welding of aluminium alloys

Jelena Špehar
2021.

Influence of AC TIG welding parameters on microstructure of P91 steel

Škrtić, Mislav
2021.

Resistance spot weliding of thin steel plates

Gracin, Martin
2020.

Application of demagnetization systems in welding

Vrbanc, Martin
2020.

Optimisation of welding parameters for wire arc additive manufacturing

Vresk, Jurica
2020.

Perić, Mato ; Nižetić, Sandro ; Garašić, Ivica ; Gubeljak, Nenad ; Vuherer, Tomaž ; Tonković, Zdenko
2020.
Journal of thermal analysis and calorimetry

MIG welding of Titanium

Matić, Luka
2020.

Integral approach toward system design for welding quality documentation

Macan, Ivan
2020.

Effect of welding parameters on through-arc sensor sensitivity during GMAW robotic welding

Grgurić, Luka
2020.

TIG welding equipment development

Grgurev Rumbak, Matej
2020.

Welding of high-alloy steels with reference to the recommendations of HRN RN 1011-3

Garašić, Ivica ; Zaninović, Andrea
2020.

Weldability analysis of P91 Cr-Mo steel

Širić, Petra
2020.

Modeling and welding of steel chassis on buggy vehicle

Sedlaček, Antun
2020.

Analisys of weldability test methods according standard HRN EN ISO 17642

Škrtić, Mislav
2020.

Weldability analysis of P91 Cr-Mo steel

Petra Širić
2020.

Magnetism in welding

Garašić, Ivica ; Jurica, Maja ; Vrbanc, Martin
2020.
Zavarivanje

10CrMo9-10 GMAW weld joint properties analysis

Brković, Nikola
2020.

Welding of nodular cast iron

Despetović, Hrvoje
2020.

Perić, Mato ; Nižetić, Sandro ; Tonković, Zdenko ; Garašić, Ivica ; Horvat, Ivan ; Boras, Ivanka
2020.
Energies (Basel)

Application of WAAM technology in production of aluminum pipes using CMT process

Crnečki, Martin
2020.

Aluminium bronze weldability

Ivančić, Marko
2020.

Optimization of welding parameters for suspension elements of Formula student

Levatić, Matija
2020.

Knezović, Nikola ; Garašić, Ivica ; Jurić, Ivan
2020.
Materials

Influence of wire feed speed and welding speed on geometrical characteristics in wire and arc additive manufacturing

Ivanda, Lovro
2019.

Numerical modelling and experimental invetigation of high-efficiency welding process of thick paltes

Perić, Mato ; Šušak, Ivan ; Garašić, Ivica ; Tonković, Zdenko
2019.

Through-arc sensor parameter optimization for MAG welding

Macan, Ivan
2019.

Testing of the mechanical properties of aluminium alloy EN AW 5083 H111 welded joint

Pavlović, Anđela
2019.

CBT welding of zinc coated steels

Gorupić, Dario
2019.

Validation of the numerical model of the welding process developed according to HRS CEN ISO/TS 18166 standard guidelines

Maglica, Tomislav
2019.

Jurić, Ivan ; Garašić, Ivica ; Bušić, Matija ; Kožuh, Zoran
2019.
Jom-journal of the minerals metals & materials society

Perić, Mato ; Garašić, Ivica ; Tonković, Zdenko
2019.
Engineering power : bulletin of the Croatian Academy of Engineering

Garašić, Ivica ; Jurica, Maja ; Iljkić, Dario ; Barišić, Ante
2019.
Engineering review

Application of CMT process for wire and arc additive manufacturing

Kušević, Matija
2019.

Perić, Mato ; Garašić, Ivica ; Tonković, Zdenko ; Vuherer, Tomaž ; Nižetić, Sandro ; Dedić- Jandrek, Hrvoje
2019.
International journal of energy research

Topić, Angela ; Garašić, Ivica ; Jurić, Ivan ; Knezović, Nikola
2019.

Application of Aluminium Alloys and CMT Welding Process for Wire and Arc Additive Manufacturing

Jurić, Ivan ; Kurtela, Marin ; Garašić, Ivica ; Eržišnik, Jadranka ; Županić, Matija
2019.

Application of WAAM technology for production of profile with SG2 material grade

Abdalla, Ahmed
2019.

Knezović, Nikola ; Topić, Angela ; Garašić, Ivica ; Jurić, Ivan
2019.

Analysis of weld joints on motorbike chasis using Sysweld software

Čović, Luka
2019.

Weldability of titanium

Matić, Luka
2019.

Application of argon-helium shielding gas mixture for TIG welding of Hastelloy C-22 nickel alloy

Radić, Antonio
2019.

Influence of wire and arc additive manufacturing on properties of Inconel 625

Špehar, Jelena
2019.

Application of coldArc welding process for wire and arc additive manufacturing

Kostel, Luka
2019.

Application of Ar-He shielding gas mixture for welding of P91 steel

Jurgec, Kristijan
2019.

Energy Input Calculation by Analysis of Dynamic Characteristic of MAG Welding Process

Car, Luka
2019.

Application of modified MAG process in spray arc mode

Špehar, Marko
2019.

Testing of stress corrosion on samples produced with WAAM technology

Karamarko, Marija
2019.

Dynamic characteristic of GMAW welding power source

Širić, Petra
2019.

Application of Aluminium Alloys and CMT Welding Process for Wire and Arc Additive Manufacturing

Županić, Matija
2019.

Application of Inconel 625 filler metal for welding of P91 steel in dissimilar joints

Čukman, Jurica
2019.

Bušić, Matija ; Jurica, Maja ; Garašić, Ivica ; Kožuh, Zoran
2019.

Garašić, Ivica ; Kožuh, Zoran ; Jurica, Maja
2019.

Development of welding technology for steel chassis of buggy vehicle

Sedlaček, Antun
2019.

Parametrisation of trough arc sensor at MAG robotic welding

Juras, Matija
2018.

Influence of shielding gas on mechanical properties of SG 120 wire weld metal

Hrgar, Robert
2018.

Automated TIG welding of stainless steel pipes

Bionda, Filip
2018.

Analysis of microstructure in wire and arc additively manufactured duplex stainless steel

Karamarko, Marija
2018.

Modified MAG processes for high production welding

Mikulić, Matija
2018.

Application of aluminium alloys for Wire and Arc Additive Manufacturing

Županić, Matija
2018.

Robotized MAG welding

Kantolić, Dario
2018.

Application of austenitic electrodes for underwater wet welding

Abdalla, Ahmed
2018.

Parameter optimization for wire and arc additive manufacturing of Al-Mg alloy

Liber, Mario
2018.

Welding of the duplex steel with flux cored wire

Radiković, Marsel
2018.

Numerical simulation of welding distortions at complex structures

Jurković, Karlo
2018.

Bušić, Matija ; Garašić, Ivica ; Kožuh, Zoran ; Šimunović, Vinko ; Vidranski, Denis
2018.

Analysis of Welding Technology for Selfshielded Flux Cored Arc Process of Rail Profile 60R1

Garašić, Ivica ; Jurić, Ivan ; Vranješ, Darko
2018.
Zavarivanje

Perić, Mato ; Garašić, Ivica ; Nižetić, Sandro ; Dedić Jandrek, Hrvoje
2018.
Energies (Basel)

Duplex Stainless Steel Application in Wire and Arc Additive Manufacturing

Jurić, Ivan ; Garašić, Ivica ; Klaić, Miho ; Uđbinac, Domagoj
2018.
Zavarivanje

Bušić, Matija ; Garašić, Ivica ; Zoran, Kožuh ; Jakovljević, Suzana ; Šimunović Vinko
2018.

Perić, Mato ; Dedić-Jandrek, Hrvoje, Nižetić, Sandro ; Garašić, Ivica
2018.

Jurica, Maja ; Kožuh, Zoran ; Garašić, Ivica ; Bušić, Matija
2018.

Application od D-Arc process for welding of thick- walled structures

Cerovečki, Bruno
2018.

Comparative analysis of welded joints produced by conventional MAG and D-Arc process

Golubić, Mario
2018.

Application of basic flux cored wires for welding of high strength steel

Štavalj, Stjepan
2018.

pplication of virtual welding simulator in welder training

Crnečki, Martin
2018.

Susceptibility of API 5L X80 steel to cold cracking

Radić, Antonio
2018.

TIG welding of nickel super alloy Hastelloy C-22

Tomišić, Marin
2018.

Influence of shielding gas at TIG welding of titanium

Vukoja, Matija
2018.

Development of processes and equipment for welding of polyethylene pipelines

Perić, Vanja
2018.

Development of processes and equipment for welding of polyethylene pipelines

Perić, Vanja
2018.

Application of gas mixtures He3H1 in robotized TIG welding of Cr-Ni steel

Šetinc, Marin
2017.

Underwater wet welding of martensitic steel X3CrNiMo13-4

Cerovečki, Bruno
2017.

Weldability testing of aluminum alloys

Vlahović, Marko
2017.

Wire Arc Additive Manufacturing

Bušić, Matija ; Garašić, Ivica ; Kožuh, Zoran ; Eržišnik Jadranka ; Dominković, Franjo ; Ilić, Dražen
2017.

Characteristics of modern MAG welding power sources

Tomišić, Marin
2017.

Welding of Polymers in Automotive Industry

Lisičak, Ivan
2017.

Development of Brazing Technology.

Parać, Marin
2017.

Application of MAG CBT process for wire arc additive manufacturing

Torer, Ivan
2017.

Application of Inconel 625 for Wire Arc Additive Manufacturing

Krišto, Mate
2017.

Robotized MAG Welding of Duplex Steel

Ptičar, Martin
2017.

Classification of imperfections in heat cutting

Jelić, Nikola
2017.

Application of pulse current in robotized MAG welding

Špehar, Marko
2017.

Requirements for welding and NDT according standard HRN EN 1090-2

Čović, Luka
2017.

Application of Numerical Simulations in Welding Technology

Kožuh, Zoran ; Garašić, Ivica ; Eržišnik, Jadranka ; Jurić, Ivan
2017.

Application of Duplex Steel for Wire Arc Additive Manufacturing

Uđbinac, Domagoj
2017.

Optimization of Welding Technology for Joining of Steels

Vidranski, Denis
2017.

Application of MAG CBT Process for Wire and Arc Additive Manufacturing

Garašić, Ivica ; Kožuh, Zoran ; Jurić, Ivan ; Torer, Ivan
2017.

Jurica, Maja ; Kožuh, Zoran ; Bauer, Branko ; Garašić, Ivica
2017.
Materiali in tehnologije

Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625 Alloy

Sinković, Martin
2017.

Quality Assurance System in Welding of Pressure Equipment

Antolić, Adrian
2017.

Analysis of Production Standards and Directives in Welding of Pressure Equipment

Radoš, Martina
2017.

Influence of Chemical Composition on the Quality of MIG welded As-Cast Aluminium alloy Joint

Bauer, Branko ; Jurica, Maja ; Dolinar, Alen ; Garašić, Ivica
2016.

Influence of Chemical Composition on the Quality of MIG welded As-Cast Aluminium alloy Joint

Bauer, Branko ; Jurica, Maja ; Dolinar, Alen ; Garašić, Ivica
2016.

Analysis of distortion during welding of austenitic Cr-Ni steels by application of Visual Weld software

Zgurić, Mislav
2016.

MAG CBT welding with threecomponent gax mixtures

Sinković, Martin
2016.

Tomić, Tanja ; Kožuh, Zoran ; Garašić, Ivica ; Samardžić, Ivan
2016.
Metalurgija

Tomić, Tanja ; Kožuh, Zoran ; Garašić, Ivica ; Samardžić, Ivan
2016.
Metalurgija

Microstructure of balistic reinforced welded joint on ARMOX 500 T steel

Čabraja, Kristijan
2016.

Perić, Mato ; Tonković, Zdenko ; Garašić, Ivica ; Vuherer, Tomaž
2016.
Ocean engineering

Influence of welding technology on strength of balistic reinforced welded joint on ARMOX 500T steel

Pek, Nikola
2016.

TIG welding of martensitic steel X3CrNiMo13-4

Krišto, Mate
2016.

Application of Visual-Weld 11.0 software for determination of optimal preheat temperature

Lisičak, Ivan
2016.

Characteristics of modern power sources for MAG welding

Bilandžija, Josip
2016.

MAG CBT welding oh highalloyed Cr-Ni steels

Ptičar, Martin
2016.

Application of flux cored wire for welding of dissimilar steels

Zidarić, Karlo
2016.

Repair welding of gray cast iron

Jurković, Karlo
2016.

Application of Visual-Weld software for determination of optimal heat input

Vidranski, Denis
2016.

Influence of shielding gas on joint geometry at MIG/MAG welding of Cr-Ni steels

Garašić, Ivica ; Jurica, Maja, Požgaj, Vedran
2016.

Analysis of welded joints produced with basic double coated electrode

Bušić, Matija ; Garašić, Ivica ; Kožuh, Zoran ; Dolić, Natalija
2016.

Influence of filler material on impact toughness of high strength steel weld joint

Tandarić, Karlo
2016.

A-TIG welding of duplex steels

Babić, Nikola
2016.

Application of MIG process for wire arc additive manufacturing

Dominković, Franjo
2016.

Influence of heat input on strength of weld joint in aluminium alloy series 6000

Satinović, Antonio
2016.

Analysis of residual stresses in welding of unalloyed steels by application of Visual Weld software

Matija, Denis
2016.

Application of ceramic backing in MIG welding of aluminium

Sinanović, Adnan
2016.

Pulse MAG welding of highalloyed Cr-Ni steels

Mikulić, Matija
2016.

Application of Visual-Weld 11.0 software for determination of optimal welding sequence

Platužić, Marko
2016.

Optimization of metal transfer for Wire and Arc Additive Manufacturing

Ilić, Dražen
2016.

Application of Visual-Weld software for determination of aluminium welding thermal cycle

Vindiš, Marko
2016.

Resistance Spot Welding of Dissimilar Steels

Hlevnjak, Alen
2016.

Analysis of hot cracking appearance during welding of dissimilar steels

Bajs, Marko
2015.

Shielding gases for tig welding

Tirić, Tomislav
2015.

Garašić, Ivica ; Kožuh, Zoran ; Remenar, Maja
2015.
Tehnički vjesnik = Technical gazette

Garašić, Ivica ; Kožuh, Zoran ; Remenar, Maja
2015.
Tehnički vjesnik = Technical gazette

Threecomponent gas mixtures for MAG welding

Levačić, Lidija
2015.

Comparison of conventional and CBT metal transfer in transition arc transfer mode

Jurica, Maja ; Garašić, Ivica ; Kožuh, Zoran
2015.

Weldability assessment methods of high strength steels

Tandarić, Karlo
2015.

Robotized TIG welding

Vidak, Josip
2015.

Review and development of filler materials for MAG welding

Bilandžija, Josip
2015.

Analysis of weld failure on aluminium bicycle frame

Satinović, Antonio
2015.

Application of SAW process in welding of steel SA516 Gr70

Vusić, Filip
2015.

Optimization of the A – TIG bead on plate welding flux composition

Garašić, Ivica ; Kožuh, Zoran ; Jurica, Maja ; Tomić, Tanja ; Čolić, Luka ; Babić, Nikola
2015.

Weldability of X3CrNiMo13-4 martensitic steel

Barić, Edi Eduard
2015.

Spot resistance welding of high alloyed stainless steels

Hlevnjak, Alen
2015.

Determination of balistic characteristics on ARMOX 500T steel welded joint

Barišić, Ante
2015.

Defects in MAG welding

Gjuretek, Dominik
2015.

Welding of zinc coated steels

Uđbinac, Domagoj
2015.

Optimization of parameters in resistance projection welding of wire-tube assembly

Puče, Andro
2015.

Welding of tram trails with selfshielded flux cored wire

Jurić, Ivan
2015.

Influence of activation flux on mechanical and corrosion properties of welded joint

Pongrac, Dario
2015.

Robotized welding of stainless steels with A-TIG process

Čolić, Luka
2015.

Sistematization of testing procedures for determination of weldability

Ratajec, Mihovil
2015.

Influence of the shielding gas on MAG welding of austenitic steel

Požgaj, Vedran
2015.

Defects in weld joints

Juraga, Ivan ; Ljubić, Kruno ; Živčić, Milan ; Garašić, Ivica
2015.

Analysis of dinamic characteristic in MAG CBT welding process

Babić, Nikola
2015.

Optimization of TIG welding parameters for AW 5083 aluminum alloy

Vlahović, Marko
2015.

Approach analysis toward optimization of robotized MAG welding

Arambašić, Đorđe
2014.

Determination of MAG welding dinamic characteristic

Puče, Andro
2014.

Determination of lasers's cut quality on AISI 316 steel

Tomić, Tanja ; Kožuh, Zoran ; Kralj, Slobodan ; Garašić, Ivica, Vlahov, Marko
2014.

Metal transfer analysis during MAG CBT welding

Garašić, Ivica ; Kožuh, Zoran ; Remenar, Maja
2014.
Zavarivanje

Analitički i eksperimentalni pristup određivanju zavarljivosti pri mokrom podvodnom zavarivanju

Mikulić, Ivan
2014.

Classification of welding processes according to HRN EN ISO 4063

Delač, Domagoj
2014.

Application of orbital TIG welding

Pikelj, Tomislav
2014.

Quality assurance system in welding production

Sinanović, Adnan
2014.

MIG welding of aluminium alloys

Jurić, Ivan
2014.

Application of standard HRN EN 1090 in welding production

Požgaj, Vedran
2014.

Variable polarity GMAW welding - specific issues and application

Garašić, Ivica ; Remenar, Maja ; Kufrin, Tomislav
2014.
Zavarivanje

Characteristics of pulse current TIG welding

Karaga, Ivan
2014.

Weldability of high strength steels

Vusić, Filip
2014.

Metal transfer analysis during MAG CBT welding

Garašić, Ivica ; Kožuh, Zoran ; Remenar, Maja
2014.

Perić, Mato ; Tonković, Zdenko ; Rodić, Alan ; Surjak, Martin ; Garašić, Ivica ; Boras, Ivanka ; Švaić, Srećko
2014.
Materials and design

Cladding of heat exchanger with high alloyed steel AISI 410

Komin, Matija
2014.

Repair welding in maintenance of mechanic components

Hajdu, Ivan
2014.

Welding of wear resistant steels

Pongrac, Dario
2014.

Dolić, Natalija ; Garašić, Ivica ; Malina, Jadranka ; Kožuh, Zoran
2014.

Welding of dissimilar steels

Zidarić, Karlo
2014.

Application and specific issues of modified MAG processes

Bajs, Marko
2013.

Application of self shielded flux cored wire welding process for joining of rails

Barić, Edi-Eduard
2013.

TIG welding of copper

Čolić, Luka
2013.

Optimization of robotized MAG welding in production of snow ploughs

Arambašić, Đorđe
2013.

Characteristics of alternating current MIG/MAG welding

Kufrin, Tomislav
2013.

Application of robotized MIG welding in production of compression clamps

Cvetković, Nino
2013.

Tomić, Tanja ; Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Brumec, Gašpar
2013.
Zavarivanje i zavarene konstrukcije

Application of Lantek software for plasma CNC cutting system

Brajković, Ivan
2013.

Specific functions of power sources for TIG welding of aluminium

Kos, Hrvoje
2013.

APPLICATION OF ALTERNATING CURRENT FOR MAG CLADDING OF INCONEL 625

Garašić, Ivica ; Kožuh, Zoran ; Kralj, Slobodan ; Tomić, Tanja ; Glogović, Zlatko
2013.

Influence of gas root shielding at TIG welding of high alloyed Cr-Ni steels

Keleš, Danijel
2012.

Susceptibility of API 5L X80 steel to cold cracking

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Tomić, Tanja
2012.
Zavarivanje

Characteristics of arc welding with flux cored wires

Brajković, Ivan
2012.

Dolić, Natalija ; Malina, Jadranka ; Kožuh, Zoran ; Garašić, Ivica ; Tunić Jozef
2012.

TIG welding of high alloyed Cr-Ni steels

Vlahov, Marko
2012.

Effects of heat input upon welded joint made on X80 steel grade

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Šakić, Nikola ; Tomić, Tanja
2012.

Effects of metal transfer mode upon the sensitivity of electric arc sensor

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Remenar, Maja ; Bilić, Livio
2012.

Welding of aluminium alloy AlMg4, 5Mn

Levačić, Damir
2012.

Tonković, Zdenko ; Perić, Mato ; Surjak, Martin ; Garašić, Ivica ; Boras, Ivanka ; Rodić, Alan ; Švaić, Srećko ;
2012.

Optimization of MAG welding parameters for high strength steel grade API 5L X80

Brumec, Gašpar
2012.

Comparison of MAG welding with solid and metal flux cored wire

Branilović, Dino
2012.

MATHEMATICAL MODELING OF COLD CRACK APPEARANCE DURING UNDERWATER WET WELDING

Garašić, Ivica ; Kožuh, Zoran ; Kralj, Slobodan ; Barun, Trpimir
2012.

Modern processes of MIG/MAG welding

Garašić, Ivica ; Kralj, Slobodan ; Kožuh, Zoran
2011.
Zavarivanje

Specific issues and application of plasma welding

Garašić, Ivica ; Kožuh, Zoran ; Kralj, Slobodan
2011.

Garašić, Ivica
2011.

Garašić, Ivica ; Ćorić, Anto ; Kožuh, Zoran ; Samardžić, Ivan
2010.
Tehnički vjesnik = Technical gazette

Underwater wet welding of duplex steel

Garašić, Ivica ; Kralj, Slobodan ; Kožuh, Zoran ; Barun, Trpimir
2010.

Garašić, Ivica ; Kralj, Slobodan ; Kožuh, Zoran ; Pacak, Miroslav
2010.
Brodogradnja

Comparison of acetylene and propane-butane gas cutting

Kožuh, Zoran ; Glogović, Zlatko ; Garašić, Ivica ; Petrović, Vedran
2010.
Zavarivanje

Kožuh, Zoran ; Kralj, Slobodan ; Garašić, Ivica ; Dorn, Lutz
2010.
Materialwissenschaft und Werkstofftechnik

Welding issues of dissimilar steels

Mezga, Vilim
2009.

Impact factors in arc stud welding

Gordić, Danko
2009.

Reparaturno zavarivanje sitnozrnatih čelika za kamionske šasije

Markulin, Ivica
2009.

Advantages of automated welding in fabrication of pipelines

Kralj ; Slobodan ; Radošević, Branko ; Kožuh, Zoran ; Garašić, Ivica
2009.
Zavarivanje

Application of low-energy MAG processes in cladding

Herak, Ivica
2009.

Garašić, Ivica ; Kralj, Slobodan ; Kožuh, Zoran
2009.
Transactions of FAMENA

Application of Tekken test in investigation of cold cracking in underwater wet welding

Barun, Trpimir
2009.

Hot wire TIG welding of high alloyed corrosion resistance steel

Panjković, Vladimir
2009.

AUTOMATED TIP TIG WELDING

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Panjković, Vladimir
2009.

Kralj, Slobodan ; Garašić, Ivica ; Kožuh, Zoran
2009.
Welding in the world

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Radošević, Branko
2008.
African fusion

Osjetljivost čelika X70 na hladne pukotine pri mokrom podvodnom zavarivanju

Garašić, Ivica
2008.

Welding of API 5L X70 pipeline

Kralj, Slobodan ; Radošević, Branko ; Garašić, Ivica
2008.
Zavarivanje

Kralj, Slobodan ; Garašić, Ivica ; Kožuh, Zoran
2008.
Welding in the world

State of the art and trends in development of underwater welding

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2008.

Kralj, Slobodan ; Radošević, Branko ; Kožuh, Zoran ; Garašić, Ivica
2007.
Welding in the world

Modern systems for automatic welding of main pipelines

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2007.

Muravin, Gregory ; Muravin, Boris ; Kralj, Slobodan ; Garašić, Ivica ; Vručinić, Goran
2007.

Underwater wet welding of duplex steel

Miloš, Maro
2006.

State-of-the-art and trends of development in underwater wet welding and NDT inspection

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2005.
Zavarivanje

Modern technologies for maintenance of underwater structures

Kralj, Slobodan ; Markučič, Damir ; Kožuh, Zoran ; Garašić, Ivica
2005.
Biuletyn Instytutu Spawalnictwa w Gliwicach

Instalation of CNC system for laser and plasma cutting

Kralj, Slobodan ; Bauer, Branko ; Udiljak, Toma ; Garašić, Ivica ; Mihoci, Kristijan
2005.

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2005.

Techniques of underwater welding

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2004.
Održavanje i eksploatacija

INFLUENCE OF ANTI-SPATTER PRODUCTS ON THE WELD QUALITY

Kralj, Slobodan ; Pedišić, Ljiljana ; Garašić, Ivica ; Glogović, Zlatko
2004.

UNDERWATER WET WELDING AND UNDERWATER INSPECTION IN MAINTENANCE OF OBJECTS IN MARITIME ENGINEERING

Kralj, Slobodan ; Garašić, Ivica ; Kožuh, Zoran
2004.

APPLICATION OF ROV`S IN ERECTION AND MAINTENANCE OF OFF-SHORE OBJECTS

Kralj, Slobodan ; Garašić, Ivica
2004.

Underwater repair welding

Kralj, Slobodan ; Garašić, Ivica
2004.

Certification of companies engaged in welding production according to European Rules

Kralj, Slobodan ; Grubić, Kajo ; Kožuh, Zoran ; Garašić, Ivica
2004.
Zavarivanje i zavarene konstrukcije

ROV AND AUV- DEVELOPMENT, APPLICATION, COMPARISON

Kralj, Slobodan ; Garašić, Ivica
2004.

System for education and Qualification of Welding Personnel-Application in Croatia

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2004.

TECHNIQUES OF UNDERWATER WELDING

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2003.

UNDERWATER ENGINEERING IN MAINTENANCE OF NAVAL OBJECTS

Kralj, Slobodan ; Kožuh, Zoran ; Belinić, Zlatko ; Garašić, Ivica
2003.

Certification of Companies engaged in Welding Pproduction according to European Rules

Kralj, Slobodan ; Grubić, Kajo ; Kožuh, Zoran ; Garašić, Ivica
2003.

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Dorn, Lutz
2003.
Welding and cutting

CERTIFICATION OF COMPANIES AND WELDING PERSONNEL ACCORDING TO EUROPEAN RULES

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2003.

INFLUENCE OF "ANTI-SPATTER" SPRAY ON QUALITY OF WELDED JOINTS

Gotić, Tomislav
2003.

Influence of water surrounding on underwater wet welding parameters

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica ; Dorn, Lutz
2002.
Schweissen + Schneiden

Waterproof sheathings for underwater wet welding electrodes

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2001.

Effects of the waterproof coating upon the characteristics of welded joints made in seawater

Kralj, Slobodan ; Kožuh, Zoran ; Garašić Ivica
2001.

Kralj, Slobodan ; Kožuh, Zoran ; Garašić, Ivica
2000.

Electrodes for underwater wet welding