Sonja Jozić

COMPUTER SIMULATION USE IN SAND CASTING PROCESS OPTIMISATION

Development of machining simulation models using Coupled Eulerian–Lagrangian (CEL) formulation

Alumina-based cutting tools—a review of recent progress

The influence of mass fraction and size of stainless steel reinforcements on the structure and microhardness of aluminium matrix composites

Sustainable Cutting Environment Evaluation for Drilling of Aluminum A380 Foam Produced by Semisolid Recycling

APPLICATION OF METAL FOAMS OBTAINED BY RECYCLING ALUMINUM CHIPS TO CORK INDUSTRY WASTEWATER TREATMENT

Application of cold compressed air cooling with the aim of increasing sustainability

SIMULATION OF SEMI-SOLID PROCESSING WITH NOVAFLOW&SOLID SOFTWARE

Production of open-cell metal foams by recycling of aluminum alloy chips

Orthogonal cutting simulation of EN AW 6082 T6 alloy using a coupled Eulerian-Lagrangian approach

Selection of the gating system for gravity casting using numerical simulation

Application of modal analysis on machine tool for stability lobe diagram generation

Analysis of production method and stabilizing agent on structure of aluminum metal foams

Hard Milling Process Based on Compressed Cold Air- Cooling Using Vortex Tube for Sustainable and Smart Manufacturing

EXPERIMENTAL INVESTIGATION OF FACE MILLING ALUMINUM ALLOY EN AW – 2011 T6 USING VARIOUS COOLING TECHNIQUES

Proceedings of 11th International conference "Mechanical Technologies and Structural Materials"

Corrosion behavior of Al foams in 0.5 M NaCl solution

Investigation of different cutting conditions in the machining of steel — towards cleaner production

Production of Closed-Cell Foams out of Aluminum Chip Waste: Mathematical Modeling and Optimization

Corrosion Behavior of Different Types of Stainless Steel in PBS Solution

Influence of cutting parameters on cutting forces and surface roughness in milling of aluminum foam

CONTRIBUTION TO SUSTAINABILITY BY RECYCLING ALUMINUM ALLOY CHIPS

Selection of optimal die casting process parameters based on simulation and genetic algorithms

Aluminium foams made of various aluminium alloys scrap and various foaming agents

Production of Open Cell Foams Out of Aluminium Chips

SIMULATION OF REAL IMAGE MICROSTRUCTURAL MODEL OF SEMI-SOLID ALUMINIUM ALLOY USING A COUPLED EULERIAN–LAGRANGIAN APPROACH

Optimization for an efficient and highly productive turning process

Production of Open-Cell Foams out of Aluminium Chips

Influence of semi-solid metal processing and artificial aging on microstructure and hardness of the AlSi9Cu3(Fe)

Design and Improvement of High Pressure Die Casting Process based on NovaFlow&Solid Software

Proceedings of 10th International conference "Mechanical Technologies and Structural Materials"

SEMI-SOLID METAL PROCESSING; CHALLENGES AND INOVATIONS

Aluminium and aluminium alloys surface protection by the use of anodization technology

Production of closed cell foams from the aluminium chip waste

Optimization of Semi-solid High- Pressure Die Casting Process by Computer Simulation, Taguchi Method and Grey Relational Analysis

Thermomechanical treatment of A380 aluminum alloy for globular thixo feedstock

Experimental analysis and optimization of the controllable parameters in turning of en aw-2011 alloy; dry machining and alternative cooling techniques

Microstructure of the extruded aluminium AlSi9Cu3(Fe) machining chips reheated in the semisolid state

Adaptive neuro-fuzzy and regression models for predicting microhardness and electrical conductivity of solid-state recycled EN AW 6082

Influence of Processing Parameters on the Performances of High Pressure Die Casting Process

Die for Equal Channel Angular Pressing (ECAP) process: Design and Manufacturing

INFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380

Surface roughness modelling in super duplex stainless steel turning

Optimization of High Pressure Die Casting Process using Taguchi method and Computer Aided Casting Simulation Technique

Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis

EXPERIMENTAL INVESTIGATION OF SUPER-DUPLEX STAINLESS STEEL TURNING

Finite Element Simulation of Stresses Distribution and Tool Displacement in the Cutting Tool during hard end-milling in different machining conditions

Development and optimization of surface roughness predictive models in turning super duplex stainless steel by using artificial intelligence methods

Mathematical modeling of solid-state recycling of aluminum chips

Reverse engineering process application in single item production

Performance of environmentally friendly machining using compressed cold air cooling: focusing on process level activities and improvements

IMPLEMENTATION OF CAD/CAM TECHNOLOGIES IN ADVANCED PRODUCT MANUFACTURING

Cost estimation of milling production process based on a modular machining in software package CATIA V5

Flank wear and surface roughness in end milling of hardened steel

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis

Application of compressed cold air cooling: achieving multiple performance characteristics in end milling process

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis

A New Mathematical Model for Flank Wear Prediction Using Functional Data Analysis Methodology

Contribution to the assessment of economic viability of hard milling process

Investigation of cutting parameters influence during milling process applying cold compressed air

Evaluation of 3D tool wear in machining by successive stereo-photogrammetry and point cloud processing

Achievement of Green Manufacturing using Alternative Types of Cooling in Machining Processes

Effect of cooling with cold compressed air using vortex tube on tool performance in milling process

Optimization of cutting parameters in three axis surface milling

Flank wear in up and down milling

Pregled i primjena sustava prikupljanja podataka za mjerenje sile rezanja pri glodanju

Modeling of the influence of cutting parameters on the surface roughness, tool wear and the cutting force in face milling in off-line process control

MULTIPARAMETER HARD MILLING MODELING AND OPTIMIZATION

Nestandardni postupci obrade odvajanjem - obrada ultrazvukom

Cutting force analysis in face milling using rotatable central composite design of experiments and Taguchi method

Modeliranje trošenja stražnje površine alata pri obodnom glodanju

TOOL WEAR ON-LINE MONITORING IN END MILLING

Application of reverse engineering process in mold manufacturing industry

Nestandardni postupci obrade odvajanjem - obrada elektroerozijom

Modeling the surface roughness during milling in off-line monitoring

Reverse engineering application in preservation of cultural heritage

Nestandardni postupci obrade odvajanjem - obrada vodenim mlazom

Design of experiment's application in the optimization of milling process

Cutting force analysis in face milling using rotatable central composite design of experiments and Taguchi method

Flank wear prediction in end milling using regression analysis and radial basis function neural networks

Design of experiment's application in the optimization of milling process

Analyzing and Modeling of the Influence of Cutting Parameters on the Cutting Force in Face Milling

INVESTIGATION OF DRILLING PROCESS USING REGRESSION ANALYSIS AND NEURAL NETWORK

Mjerenje sila rezanja pri čeonom glodanju

Regression analysis, support vector machines and Bayesian neural network approaches to modeling surface roughness in face milling

Mjerenje trošenja alata i hrapavosti obrađene površine pri čeonom glodanju